DutchEnglishFrenchGermanItalian
Bundutec Awnings

Bundutec Awnings – Quick to Erect & Built Tough.

BunduAwn is a Wing Awning that is quick to erect and built tough. The BunduAwn requires no poles and has a shade area that covers 3 sides of your vehicle. The Aluminised reflective surface provides a cooler area under the awning.

The Bundutec BunduAwn 3 sided wing awning offers more shade area than any other competitors vehicle mounted awning.

Awnings are available in various sizes.

All these South African made awnings are heavy duty and made from Riptech, Reflective Aluminised Canvas.

The Bundutec Awning Range

  • Companion (L shape)
  • Bundu Half Wing (2 Sided)
  • Bundu L (2 Sided)
  • BunduAwn (3 Sided Poleless)

Companion (L shape with square back)

Dimensions are 2.45m across the back plate opening out to a massive 7.05 metres long by 2.3 metres deep.

This awning weighs approximately 21 kg. Please note: Poles are not supplied.

Bundu Companion L Shaped Awning 2.45 metre $1,599 

2 Sided Wing Awning (Bundu Half Wing)

The Bundu Half Wing is absolutely ideal for that quick lunch stop and easy to set up in moments by one person.

It requires NO Poles and has a handy shade area covering 2 sides of the vehicle.

This awning weighs approximately 18 kg.

Bundu Half Wing Awning 2.45 metre $1,499 

2 Sided Wing Awning (Bundu L)

The Bundu L is ideal to quickly set up at the end of the day and is easy to handle by one person. It has a huge shade area covering 2 sides of the vehicle, caravan, trailer, slide on camper, or even your motorhome. The uses are endless.

The front left arm has a support pole built in to give additional support.

This awning weighs approximately 20 kg (2.45 metre long awning) or 22 kg (2.95 metre long awning).

Bundu L Shaped Awning 2.45 metre $1,599
Bundu L Shaped Awning 2.95 metre $1,699 

3 Sided Poleless Wing Awning (BunduAwn)

BunduAwn is a Wing Awning that has a massive shade area covering 3 sides of the vehicle. The Aluminised reflective surface provides a cooler area under the awning.

Available in 2 sizes: 2.45 metre and 2.95 metre.

This awning weighs approximately 22 kg (2.45 metre long awning) or 24 kg (2.95 metre long awning).

These are extremely robust awnings! Ideal for a massive shade area. The Bundutec BunduAwn 3 sided wing awning offers more shade area than any other vehicle mounted awning. They are very quick and easy to set up.

BunduAwn 3 Sided Wing Awning 2.45 metre $1,599
BunduAwn 3 Sided Wing Awning 2.95 metre $1,699

Side Panels

Hanging side panel with Velcro edges and vinyl base strip for pegging down.

Please note that we recommend poles to be added when using side panels to support the weight of the panel. Even though poles are not required when using the awning only. Poles are not included with any awning or panel purchase. All prices are based on pick-up from our warehouse in Forrestdale.

A: 2.45 metre: $289

Hanging side panel with Velcro edges and vinyl base strip for pegging down. This panel fits the long side of the Bundutec 2.45 awnings and is made from Non Aluminised Ripstop Canvas to match the Bundutec Awnings.

B: 2.95 metre: $289

Hanging side panel with Velcro edges and vinyl base strip for pegging down. This panel fits the long side of the Bundutec 2.95 awnings and is made from Non Aluminised Ripstop Canvas to match the Bundutec Awnings.

C: 3.30 metre: $289 

Hanging side panel with Velcro edges and vinyl base strip for pegging down. This panel fits the triangular end of the Bundutec awnings and is made from Non Aluminised Ripstop Canvas to match the Bundutec Awnings.

D : 3.30 metre: $199 (long side) triangular roof extension. This is to add on to the triangular end of the Bundutec awnings. It extends out to make the end of the awning square and provide additional shade when required. Please note that a pole and rope will be required (Not supplied).
The extension is manufactured from the same aluminised reflective canvas as the awning is.

All awnings made with quality Riptech™/Aluminised and carry a 2 Year Warranty* 

Riptech/Aluminised was created by using Riptech300 and coating the one side with a silver resin. The silver side must face towards to the sun in order to redirect as much heat away from the underside of the material. This material is waterproof.

This material can be used for awnings, tents, gazebos, tarps, with the purpose of reflecting heat and keeping you cool. This material can make a difference in temperature of up to 5 degrees Celsius.

*2 YEAR WARRANTY This applies to the entire range of RIPTECH™ fabrics. The fabric is guaranteed for a period of two years, during which it covers any abnormal deterioration of the waterproofing properties and general structural integrity of the fabric, given a normal exposure to weather and in the case that care and cleaning advices summarised in this document have been properly followed. The warranty includes the replacement of the fabric required to replace the product in question, excluding other expenses such as postage, sewing, labour and / or assembly.This warranty does not cover damages caused by accidents, mechanical action, rubbing, chemical aggressive agents, abuse and / or negligence.This warranty is applied from the date of the assembly of the product and any claim must be accompanied with the installers receipt and relevantroll number stating that the fabric used was RIPTECH™.

Important advice about poles

Although the awnings can be used without poles, they still require the ropes to be tied down to prevent flipping over from wind gusts. Poles are recommended to be added for extra strength in heavier weather conditions.

Watch the review by Stefan from All Off Road regarding the optional addition of poles.

Canvas Specifications

Properties Specifications Test Methods
Composition: Polyester/Acrylic 0
Coating: Silver Resin 0
Construction: Woven Ripstop 0
Weight (gms): 310±5% 0
Width (cm): 175 0
Tensile Strength (N): Warp >1600 BS 13934-1:1999
Weft >1400 BS 13934-1:1999
Water Penetration (mm): >800 ISO 811
Colour Fastness to Light (Blue Wool Scale): 7 ISO 105-B04
Colour Fastness to Rubbing (Grey Scale): 4 ISO 105-x12
Fungal Resistance: PASS Acti-Chem M/L 13
Specifications
Standard Size
2100 x 1350 x 300 mm
King Size
2100 X 1600 x 300 mm
Mattress
Comfy 100 mm High Density Foam Mattress. (Most Competitor Rooftop tents have 50 mm or 75 mm mattresses.)
Access to Roof Top Tent
Access from all 4 sides. This alleviates an inconvenient ladder blocking access to the side or rear door of your vehicle.
Roof
Insulated
Accessories included
  • 12 Volt Light and Power Outlet Inside the Roof Top
  • 2 x Electric Fans
  • Solar connectors (Anderson plugs) top and bottom
  • 12 Volt Electronic override.
Manufactured
Made in South Africa. Home of the original roof top tent.
Accessories included
1x Telescopic ladder 1x Mattress 1x Solar LED light 1x Set of Mounts, Screws and Tools 1x Shoe Bag (for 2 pairs of shoes)
Optional Extras
The Added Room - Extra room Annexe
$899 (Fits either size tent)
200 Watt Solar Panel installed on the roof of the tent
$750
Built in regulator added to the Solar Panel
$150 (in combination with a fitted Solar Panel)
After market Key-operated Isolator to isolate the winch
$100 (in combination with a fitted Solar Panel)
Custom made Fitted Sheet to fit the exact mattress size
$35 each
Discover the Space and Freedom of WA & Beyond

Book your next adventure today

Bunduawn Awnings Enquiry

Enter your details in the form below and we will get back to you soon.

Moremi Sport Rooftop Tent Enquiry

Enter your details in the form below and we will get back to you soon.