Bundutop Awnings

Bundutec Awnings are quick to set up and built tough.
Most models require no poles and all provide a massive shade area. Each arm has guy ropes to tie down in poor weather.

Bundu Half Wing Awning 2.45 metre $1,399

Bundu L Shaped Awning 2.45 metre $1,499
Bundu L Shaped Awning 2.95 metre $1,599

Bundu Companion L Shaped Awning 2.45 metre $1,599

BunduAwn 3 Sided Wing Awning 2.45 metre $1,499
BunduAwn 3 Sided Wing Awning 2.95 metre $1,599

All these South African made awnings are heavy duty and made from Riptech, Reflective Aluminised Canvas.

Side Panels:

Hanging side panel with Velcro edges and vinyl base strip for pegging down:
A: 2.45 metre $289
B: 2.95 metre $289
C: 3.30 metre $289
Triangular roof extension (long side):
D: 3.30 metre $199

If you are adding panels to your Awning you also need to add poles (Not supplied) as the weight of the panels is too much for the Awning without poles.

All prices are based on pick-up from our warehouse in Forrestdale

Product description

2 Sided Wing Awning (Bundu Half Wing)

The Bundu Half Wing is absolutely ideal for that quick lunch stop and easy to set up in moments by one person. It requires NO Poles and has a handy shade area covering 2 sides of the vehicle.

This awning weighs approximately 18 kg.

 

2 Sided Wing Awning (Bundu L)

The Bundu L is ideal to quickly set up at the end of the day and is easy to handle by one person. It has a huge shade area covering 2 sides of the vehicle, caravan, trailer, slide on camper, or even your motorhome. The uses are endless.

The front left arm has a support pole built in to give additional support.

This awning weighs approximately 20 kg (2.45 metre long awning) or 22 kg (2.95 metre long awning).

 

Companion (L shape with square back)

Dimensions are 2.45m across the back plate opening out to a massive 7.05 metres long by 2.3 metres deep.

This awning weighs approximately 21 kg.

(poles are not supplied)

3 Sided Poleless Wing Awning (BunduAwn)

BunduAwn is a Wing Awning that has a massive shade area covering 3 sides of the vehicle. The Aluminised reflective surface provides a cooler area under the awning.

Available in 2 sizes: 2.45 metre and 2.95 metre

This awning weighs approximately 22 kg (2.45 metre long awning) or 24 kg (2.95 metre long awning).

These are extremely robust awnings! Ideal for a massive shade area. The Bundutec BunduAwn 3 sided wing awning offers more shade area than any other vehicle mounted awning. They are very quick and easy to set up.

 

Videos


Advice about poles

Please note that although the awnings can be used without poles, they still require the ropes to be tied down to prevent flip over from gusts of wind. Poles can be added for extra strength in heavier weather conditions if so desired.

Please watch the review by Stefan from All Off Road regarding the optional addition of poles:

Information about Riptech/Aluminised

Riptech/Aluminised was created by using Riptech300 and coating the one side with a silver resin. The silver side must face towards to the sun in order to redirect as much heat away from the underside of the material. This material is waterproof.

This material can be used for awnings, tents, gazebos, tarps, with the purpose of reflecting heat and keeping you cool. This material can make a difference in temperature of up to 5 degrees Celsius.

Canvas Specifications

Properties Specifications Test Methods
Composition: Polyester/Acrylic 0
Coating: Silver Resin 0
Construction: Woven Ripstop 0
Weight (gms): 310±5% 0
Width (cm): 175 0
Tensile Strength (N): Warp >1600 BS 13934-1:1999
Weft >1400 BS 13934-1:1999
Water Penetration (mm): >800 ISO 811
Colour Fastness to Light (Blue Wool Scale): 7 ISO 105-B04
Colour Fastness to Rubbing (Grey Scale): 4 ISO 105-x12
Fungal Resistance: PASS Acti-Chem M/L 13

 

Panels available

Please note that we recommend poles to be added when using side panels to support the weight of the panel. Even though poles are not required when using the awning only. Poles are not included with any awning or panel purchase.

A: 2.45 metre hanging side panel with Velcro edges and vinyl base strip for pegging down. This panel fits the long side of the Bundutec 2.45 awnings and is made from Non Aluminised Ripstop Canvas to match the Bundutec Awnings.

B: 2.95 metre hanging side panel with Velcro edges and vinyl base strip for pegging down. This panel fits the long side of the Bundutec 2.95 awnings and is made from Non Aluminised Ripstop Canvas to match the Bundutec Awnings.

C: 3.30 metre hanging side panel with Velcro edges and vinyl base strip for pegging down. This panel fits the triangular end of the Bundutec awnings and is made from Non Aluminised Ripstop Canvas to match the Bundutec Awnings.

D : 3.30 metre (long side) triangular roof extension. This is to add on to the triangular end of the Bundutec awnings. It extends out to make the end of the awning square and provide additional shade when required. Please note that a pole and rope will be required (Not supplied).
The extension is manufactured from the same aluminised reflective canvas as the awning is.

Downloads

Download the BunduAwn Info Sheet here
Download the BunduAwn Manual here
(Please be aware Australian Awnings are not shipped with any mounting brackets.)
Download our Bundutec Awning Flyer here

More information

Fill in the form for more information.